2020 Island Packet 525

1,234 sq. ft

• One-piece integral hull and keel of 100% hand laminated high modulus knitted fiberglass infused with a proprietary pressure-fed application systemLight ivory gelcoat with urethane painted boot stripe
• Fully encapsulated lead ballast forms double bottom over length of keelNo keel bolts to maintain, loosen or leak
• Molded structural interior grid unit bonded with hull and interior bulkhead system to form unified structure
• Chainplates interlocked and bonded directly with hull structure for secure “belt-and-suspenders” installation
• PolyClad3® hull gel system includes ten-year pro-rated limited warranty against osmotic blisters
• Deck laminate features Island Packet Yachts’ exclusive PolyCore®, virtually eliminating the potential for deck deterioration associated with other core materialsIncludes a 10-year pro-rated limited warranty against deck core-degradation or delamination, an industry exclusive
• Two-tone deck surfaces: light ivory with tan premium diamond pattern slip resistant surfaces
• One-piece deck attached to integral hull flange with bolts, lock nuts and urethane adhesive sealantHardware backed with aluminum plates where required
• Molded fiberglass headliner with textured finish

• Sails: in-mast vertically battened roller furling mainsail, roller furling staysail and roller furling 110% jib in high modulus Dacron® with white UV sun panels
• Headsail roller furling systems
• Main halyard led to Lewmar® Ocean Series 30CST 2-speed winch on mastMainsail roller furling control lines led to cockpit through stoppers to Lewmar® Ocean Series 48CST 2-speed winchRigid boom vangMainsheet traveler with 4:1 control system led to cockpitMain-sheet and spare main halyard led to cockpit through stoppers to Lewmar® Ocean Series 48CST 2-speed winch
• Genoa halyard led to Lewmar® Ocean Series 30CST 2-speed winch on mastTwo genoa sheets led to cockpit via adjustable cars on tracks to Lewmar® Ocean Series 64CST 2-speed winches
• Staysail sheet led to cockpit through stopper to Lewmar® Ocean Series 48CST 2-speed winchStaysail halyard led to Lewmar® Ocean Series 16C winch on mast
• Headsail furling lines led to cockpit cleats adjacent to two Lewmar® Ocean Series 30CST 2-speed secondary winches
• Hoyt Boom® equipped self-vanging staysail for ease of handling, improved performance and superb adaptability to a wide range of wind and sea conditions
• Anondized aluminum mast and booms; wire rigging, welded s/s mast rails
• Mid-boom sheeting for unobstructed cockpit and dodger installations

• Asientos de cockpit ergonómicamente diseñados de longitud completa, cojín del asiento del timón y respaldo, dos desagües de cockpit de 2”, cuatro anclajes para arneses, panel del motor adyacente al timón en un alcoba cubierta. Gran compartimento de asiento en el cockpit adecuado para el almacenamiento de botes salvavidas.
• Sistema de dirección de engranaje de transmisión directa Lewmar® Mamba™, timón de emergencia con soportes de almacenamiento. Brújula Ritchie® con cuadrícula de navegación personalizada de Island Packet, rueda de acero inoxidable con recubrimiento de vinilo, mesa de cockpit de fibra de vidrio con bisagra, provisiones para instalación de piloto automático remoto, control de motor de palanca única con cables de control Glendinning® premium, espacio para instalaciones electrónicas.
• Escotilla deslizante de pasillo con capota, pestillo interior y hasp y cerradura exterior. Indicadores de nudos, profundidad y viento Raymarine® montados en el pod de instrumentos de la capota. Montaje de dodger moldeado integral en la parte superior de la cabina. Tableros de caída de sapele macizo con acabado de barniz, tablero de caída central con puerto fijo y logotipo grabado, pasador de retención de tablero, estante de almacenamiento interior.
• Amplias cubiertas laterales y de proa con bordas protectoras, desagües hacia la franja de bota, pasamanos de acero inoxidable a lo largo de toda la parte superior de la cabina. Gran compartimento de ancla con escotilla de cubierta superior, mamparo sellado en la parte trasera, desagüe hacia la sentina con válvula de cierre; compartimentos de rode divididos con ganchos para líneas/equipos.
• Gran cubierta trasera con espacio para el almacenamiento de un dinghy (suministrado por el concesionario/propietario). Contenedor de almacenamiento de LPG. Segundo gran contenedor de almacenamiento para equipo diverso.
• Gran lazarette con escalera de acceso, ganchos para líneas, acceso al eje del timón y timón de emergencia, suelo de placa de diamante de aluminio pulido.
• Plataforma de popa integral con un par de escalones moldeados, escalera de abordaje de emergencia con correa de tracción.
• Amplia plataforma de proa integral con rodillos de ancla SeaSafe® diseñados y patentados exclusivamente por Island Packet para control de cadena/rode completamente cautivo y de bajo roce. Despliegue rápido del ancla y almacenamiento seguro para dos anclas.
• Dobles líneas de vida recubiertas de vinilo y barandillas de proa y popa de acero inoxidable, asta de bandera de acero inoxidable y soporte, cuatro (4) ventilaciones estilo Dorade con cowls de acero inoxidable con pantallas y tapones.
• Escalera de abordaje/nado en la popa.
• Barandilla de popa con banco abatible con cojines en la parte inferior y respaldo, dos puertas traseras y dos puertas laterales con líneas de vida de liberación rápida.
• Cuatro cleats de amarre de 12”, dos cleats de línea de resorte de 10”, cuñas y protectores de roce de montaje empotrado.
• Cap y riel de goteo de teca con golpeador de acero inoxidable. Desagües de cubierta lateral conducidos a través de los casquillos de la franja de bota.
• Riel de protección de vinilo de alto impacto con golpeador de acero inoxidable.

• Raised main salon with panoramic view through seven fixed safety glass windows with polished s/s exterior frames. Full length settees port and starboard with ergonomically shaped, multi-density foam cushions covered in navy or buff UltraLeather®, large storage areas behind and beneath. Port settee converts to double berth. Large drop-leaf table folds against bulkhead for open salon. Solid tongue and groove varnished sapele and oak sole.
• Aft owner’s stateroom with island berth, upholstered memory foam mattress, privacy doors to passageway and ensuite head compartment. Dressing seat, gasketed access door to lazarette. Cedar-lined hanging locker and bureaus. Solid tongue and groove varnished sapele and oak sole.
• Forward stateroom with island berth, upholstered memory foam mattress, privacy doors to forward passageway and head compartment. Cedar-lined hanging locker and bureaus. Solid tongue and groove varnished sapele and oak sole.
• Head compartments with separate stall showers and solid acrylic counters with integral fiddles. Electric flush heads with tank monitor. Molded slip-resistant sole.
• Navigation center with high-backed swivel chair with armrests covered in navy or buff UltraLeather®. Tilt-out storage bin for charts. Hanging wet locker adjacent to nav area and companionway with louvered door and drain to bilge.
• Galley with walk-through design for easy passage fore and aft. Well insulated refrigeration compartments (2) with double gasketed lids and gas support struts for easy access. Frigiboat® Keel Cooler system allows digital control of either compartments for refrigeration or freezer operation, light, storage drawer below. Deluxe three-burner Force 10® LPG stove with oven and broiler, stainless steel sealed burner top, guard rail with harness hooks, lift off cover, storage under. Microwave oven (AC operation only), deep s/s sinks, hot and cold pressure water tap with retractable spray unit, manual fresh water pump, dish rack, cutlery drawers. Solid acrylic countertops with integral fiddles. Molded slip-resistant sole.
• SeaGull® IV water filter for fresh water (cold) at dedicated faucet at galley sink.
• Second forward cabin with versatile “L”-shaped, bench-height countertop. Doubles for use as desk or work surface; cabinets under, including space for dealer/owner fitted washer/dryer. Upholstered seat on electric swivel mount stows securely away between cabinets. Two optional layouts are available or all cabinetry may be deleted for dealer/owner customization.
• Numerous s/s opening ports with safety glass and screens throughout; numerous overhead hatches with retractable screens/shades.
• Sapele hardwoods, veneers and coordinated surfaces for bulkheads, cabinetry and trim. Louvered raised panel cabin doors; louvered locker doors, extensive radius corner detailing, cedar-lined lockers and drawers.
• Furniture quality satin gloss varnish applied to all interior wood surfaces in a multi-coat process.
• Numerous chrome plated interior cabin-side lights and recessed main overhead dimmable area lights, all with LED warm-white bulbs; dimmable indirect perimeter warm-white LED ambiance lighting in main salon and all cabins; courtesy lights at companionway, electrical panel and battery selector switch; LED dome lights in engine room and aft machinery areas.
• Removable stainless steel companionway ladder with slip resistant teak treads, engine access behind.
• Sapele grate at base of companionway lifts to reveal removable dust pan, bilge access.
• Overhead and bulkhead mounted s/s handrails for safety and security.
• Storage rack for companionway boards.

• 110HP Yanmar® 4JK4-HTBE turbo diesel engine, fresh water cooled, rubber isolation mounts on reinforced fiberglass bed with integral oil pan, mechanical fuel pump, 110 amp Balmar® alternator and Charles® digital DuoCharge controllerA 3-bladed fixed prop (feathering prop optional), Racor® fuel filter with water separator mounted for easy accessJacketed fuel lines with swedged and threaded fittings, intake strainer
• Engine access from removable front and rear panels, hinged side opening doorsPre-plumbed for electric oil change system
• Extensive sound-control with premium lead-lined insulation, gasketed access doors and panels
• Six (6) premium AGM 12 volt batteries dedicated to house, plus one (1) dedicated to engine startMomentary parallel switch in cockpit for emergency starting
• Deluxe electrical panels with separate battery switch, gauges and breakers for AC and DC systems, battery test system, indicator lights and controls for electric pumps, LPG solenoid control and battery charger
• 50 amp, 120/240V AC dockside power system with ELTI ground fault inlet protection breaker and one (1) 50-foot shore power cord, services two 50 amp 120V shipboard systems through a UL® listed Charles® C-Power marine isolation transformer for added safetyA separate 30 amp inlet, breaker and cord are provided for added flexibilityNumerous outlets, all with GFCI protection
• Engine instrument panel with tachometer, hour meter and engine monitoring system
• Electrical DC grounding/bonding system for rig and all underwater metals
• Pressure water system with hot and cold service to galley, head and cockpit showerUL® listed eleven (11) gallon water heater with engine heat exchanger, insulated hot water hoses throughoutDedicated head, sink/shower drain sump with strainer
• LPG system with 10 pound aluminum tank in self-draining storage compartment with gasketed, lockable lid, remote solenoid, dual safety shutoffs and gauge; room for extra tank
• Fuel, water and holding tanks below cabin sole maximize storage and stability and minimize trim changes with varying tank fluid levels
• Fuel tank constructed of welded, baffled heavy gauge marine-grade aluminum (5052-H32) with shut off valve, s/s deck fill, tank mounted mechanical gaugePre-plumbed with second pickup/return for addition of generator and/or heater system
• ThermoCure™ fresh water tank constructed of infusion molded fiberglass using FDA approved vinylester resins, baffles, s/s deck fill, electronic remote tank level gauge
• Infusion molded fiberglass holding tank with baffles, s/s deck pump out fitting, electronic remote tank level gauge
• Heavy-duty Rule® 3700 electric bilge pump with auto control and premium WaterWitch® electronic pump switchBilgeAlert® high water bilge alarm with remote alarm panel at helm
• UL listed bronze, thru-bolted, flanged seacocks on all thru hulls below waterline; ball valves on thru-hulls in boot stripe
• LED navigation lights including masthead anchor light and foredeck/steaming light on mast
• Pre-wired for anchor windlass installation, bow thruster cables, fan and speaker wires throughout interior, VHF cable in mast and from mast step to nav area; messengers pre-run for pulling additional wire